Custom Fireplace Builder in Spokane Valley, WA
Spokane Fireplace And Patio Pros is Spokane Valley's trusted custom fireplace builder, serving restaurants on Sprague Avenue, hotels near the Spokane County Fair and Expo Center, and single-family homes throughout Veradale and Trentwood. Situated at 2,038 feet along the Spokane River, Spokane Valley is Washington State's eighth-largest city with more than 108,000 residents. From gas fireplace installation and masonry fireplace construction to outdoor fireplace design and fireplace remodeling, we manage every phase from site survey and permit coordination through final inspection, using natural stone, refractory brick, stainless steel liner systems, and Class A chimney assemblies built for Eastern Washington's demanding freeze-thaw cycles.
With 20 years serving Spokane County, our certified masons, EPA-certified gas technicians, and journeyman carpenters bring deep local knowledge to every custom hearth design, fireplace insert installation, chimney repair, and patio fire feature project we take on. We source materials from established fireplace manufacturers and regional distributors to keep lead times short and finishes consistent with local architectural styles, from Craftsman bungalows in Dishman to newer construction near Liberty Lake. Our reputation for transparent pricing and lasting craftsmanship has made us a trusted name across Spokane Valley.
Request a FREE Quote.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.
Comprehensive Fireplace Solutions in Spokane Valley
Spokane Valley experiences a temperate climate with January averages dropping to 28.3 degrees Fahrenheit and record lows reaching -10°F. Summers are equally intense, with July average highs climbing to 87°F and recorded highs reaching 113°F. Annual precipitation sits at just over 16 inches, with December delivering the heaviest rainfall of the year at 3.5 inches. Those swings between frigid winters and scorching summers create demanding conditions for any masonry or gas system.
Commercial and Residential Fireplace Services
Our team serves businesses and homeowners throughout Spokane Valley with full-service fireplace contracting backed by 20 years of local experience. For commercial clients, we manage large-scale installations in restaurants, hotels, dental offices, and office lobbies, coordinating with architects and general contractors to meet Americans with Disabilities Act (ADA), fire-code, and ventilation standards on schedule and within budget. For homeowners across neighborhoods ranging from Trentwood to Greenacres, we handle remodels, new-construction installs, and retrofit venting for older homes that were not originally designed with modern fireplace systems in mind.
Every project begins with permitting, site surveys, and load calculations performed by our licensed crew. We install gas, propane, and wood-burning units along with
electric and vent-free options suited to properties where traditional venting is not feasible. Preventive maintenance plans, chimney sweeping, and safety inspections round out our service offering and keep every system compliant and running efficiently year after year.
Custom Fireplace Design and Build Options
Our design process begins with an on-site measurement, followed by three-dimensional (3D) renderings and physical material samples so you can see exactly what
you are getting before construction starts. We work from computer-aided design (CAD) layouts and offer stone, tile, brick, and metal finishes that complement a wide range of interior styles, from Craftsman bungalows to contemporary open-plan spaces. Clients choose from linear gas fireplaces, masonry wood-burning fireplaces, zero-clearance inserts, and bespoke mantels crafted to the specific proportions of each room.
Every build meets International Residential Code (IRC) and National Fire Protection Association (NFPA) standards. Pricing is fully transparent, with itemized estimates covering labor, materials, venting, and permits so there are never unexpected costs at the end of a project. We source materials from reputable manufacturers and regional distributors, which keeps lead times manageable and ensures finishes align with the architectural character common across Spokane Valley.
Types of Fireplaces We Install in Spokane Valley
We install a full range of fireplace systems suited to Spokane Valley's climate extremes, architectural styles, and local building codes. From traditional masonry builds to modern gas and electric systems, every unit is selected and constructed to match your property's heating needs, fuel preferences, and aesthetic goals. We all install all types of fireplaces in Coeur d’Alene, Idaho.
Stone and Brick Fireplace Construction
Spokane Valley's temperature range is one of the widest in Washington State, spanning from a record low of -10°F to a record high of 113°F. That spread puts serious stress on masonry materials over time, making proper material selection and construction technique critical to long-term performance. We build custom stone and brick fireplaces using masonry chosen to suit your interior architecture and withstand those extreme thermal cycles without cracking, spalling, or losing structural integrity.
Our process moves from site assessment and structural planning through hearth construction, flue and chimney integration, and final veneer or full-stack masonry. Design options include rustic fieldstone, cut ledgestone, traditional brick soldier courses, and mixed-material faces that blend texture and color for a distinctive finished look. Fireplace wall build-outs and mantel installation are part of our standard scope, integrating the fireplace cleanly into the room's sightlines and overall design rather than leaving it as a standalone element surrounded by unfinished wall.
Gas, Electric, and Wood Burning Installations
We install gas, electric, and wood-burning fireplaces tailored to your performance needs, fuel preferences, and the specific layout of your property. For gas fireplace installation, we run approved gas lines, install direct-vent or ventless units from established manufacturers, and configure remote controls and thermostats for efficient, convenient operation. Electric fireplace installation suits remodels or spaces without existing venting, with recessed or wall-mounted units that deliver realistic flame effects and require minimal structural alteration to the surrounding walls or ceiling.
For wood-burning projects, we construct code-compliant fireboxes, liners, and chimneys and offer ash management systems and glass door options that improve both safety and heat retention. Venting, combustion air supply, and clearance requirements are addressed on every installation. Our crews coordinate with heating, ventilation, and air conditioning (HVAC) contractors and building inspectors to ensure every system is safe, warranty-backed, and fully compliant with Spokane County regulations before we hand it over.
Fireplace Inserts and Surrounds
We retrofit existing openings with fireplace inserts to improve efficiency and reduce heat loss, a practical upgrade for Spokane Valley homes where January average highs reach only 37°F and heating costs accumulate quickly through a long winter season. Gas, electric, or wood inserts fit into the existing firebox and connect to proper venting or direct-vent systems, transforming drafty, inefficient fireplaces into reliable heat sources without requiring a full tear-out and rebuild.
Surround and mantel packages customize the visible finish with options that include tile, natural stone, brick, and custom millwork matched to your existing trim and cabinetry. We measure openings precisely, verify chimney condition and liner integrity, and provide clear options along with detailed cost estimates before any work begins so you can make an informed decision without pressure.
Fireplace Remodeling, Repair, and Maintenance
Spokane Valley's wide temperature swings and freeze-thaw cycles put steady stress on fireplace systems over time, making routine upkeep and timely repairs essential to safety and efficiency. We handle everything from full aesthetic remodels and structural masonry work to mechanical troubleshooting and annual inspection programs.
Fireplace Renovation and Refacing
We design and execute complete fireplace remodels that update the look, function, and safety of existing systems in Spokane Valley homes and commercial properties. Typical projects include replacing outdated surrounds with tile, stone, or custom mantels, installing gas logs or direct-vent inserts into wood-burning openings, updating hearth dimensions to meet current code clearances, and rewiring or relocating controls for modern convenience.
For refacing projects, we remove old veneers, inspect the underlying liner and firebox for damage caused by years of thermal cycling, and install new facing materials anchored to code-approved substrates using heat-rated adhesives and refractory mortars. We provide material samples, 3D mockups, and transparent cost estimates before construction begins. For historic masonry fireplaces found throughout Spokane Valley's older neighborhoods, we apply restoration techniques that preserve original character while bringing efficiency and safety up to current standards.
Troubleshooting and Repair Services
We diagnose and repair ignition failures, weak pilot flames, blocked vents, cracked fireboxes, and deteriorating mortar joints. Our team uses combustion analyzers, video camera chimney inspections, and smoke tests to pinpoint problems quickly without unnecessary exploratory demolition. Common repairs include replacing thermocouples, ignition modules, and gas valves, relining chimneys with stainless steel liner systems, repairing or replacing damaged flue tiles, and repointing or partially rebuilding masonry that has been compromised by moisture infiltration or freeze-thaw damage over Spokane Valley's wet winter months.
We take carbon monoxide risks seriously and address backdrafting and ventilation deficiencies as a priority. If a repair requires temporarily shutting down the system for safety, we provide a written scope, clear timeline, and realistic cost estimate before any authorization is given. Parts warranties and documentation accompany every completed repair.
Maintenance and Inspection
Annual inspections and seasonal tune-ups prevent failures before Spokane Valley's coldest months arrive. Our inspection process covers chimney sweep or video scan, flue integrity check, damper operation, gas pressure testing, and verification of clearances to combustibles throughout the firebox and surrounding structure. We document all findings with photographs and detailed checklist reports, then provide a prioritized list of recommended repairs ranked by urgency and safety impact. Maintenance plans include scheduled seasonal reminders and discounted labor rates for clients who commit to recurring service agreements.
Outdoor Living Features and Fire Features in Spokane Valley
Spokane Valley's outdoor season runs from late spring through early fall, with July average highs reaching 87°F and September evenings still warm enough for comfortable outdoor entertaining. We design and install durable fire features and integrated patio systems built to perform through the region's seasonal extremes, from summer heat to winter freeze-thaw conditions.
Custom Outdoor Fireplaces and Fire Pits
Spokane Valley's outdoor season stretches from late spring through early fall, with July average highs reaching 87°F and September remaining warm enough for comfortable evening entertaining well past the Valleyfest celebration held each year at Mirabeau Point Park. We build custom outdoor fireplaces and fire pits using natural stone, cast stone, refractory brick, and stainless steel burner systems selected for durability in an outdoor environment where temperature fluctuations are significant. Every unit is engineered for proper venting, setback compliance, and fuel flexibility, and project plans are submitted to the city when required by Spokane Valley building codes.
We also incorporate wildfire defensible-space best practices into every outdoor fire feature we build, an important consideration given Eastern Washington's fire-prone summer conditions and the proximity of many Spokane Valley properties to brushy hillsides and open land. Installation timelines typically run three to ten days depending on complexity, and every project includes a written workmanship warranty and detailed maintenance guidance at handoff.
Patio Fireplace Design and Installation
We coordinate fireplace placement, orientation, and clearances with patio layout and traffic flow to maximize warmth and viewing angles for the people using the space. Our installation process includes site preparation, footing and foundation work sized for Spokane Valley's frost-line depth, refractory mortar application, and final sealing to resist freeze-thaw cycles that are most pronounced between November and March. Built-in seating walls, integrated hearths, and matched veneer finishes ensure the fireplace reads as a natural extension of the patio rather than a separate structure added as an afterthought.
All gas connections, electrical work for blowers or light-emitting diode (LED) accent lighting, and final inspections are handled by our licensed and insured team. Every patio fireplace project is quoted with a full itemization of labor, materials, permits, and recommended future maintenance tasks so clients have a complete picture of the investment from the start.